Material Testing

Does your project require Material Testing?

Concrete/Cement

  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (6×12)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (4×8)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (over 8000 psi)
  • ASTM C39 Compressive Strength of Cylindrical Concrete Specimens (over 10000 psi)
  • ASTM C495 Compressive Strength of Lightweight Insulating Concrete
  • ASTM C42 Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (cores)
  • ASTM C1550 Flexural Toughness of Fiber Reinforced Concrete (Round Panel
  • ASTM C78 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • ASTM C157 Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ACI 506, ASTM C42 and C1140 Shotcrete Nozzleman Qualification
  • ACI 506, ASTM C42 and C1140 Shotcrete Pre-Qualification Cores
  • ASTM C1140 Shotcrete Production Cores
  • AASHTO T336 Coefficient of Thermal Expansion
  • ASTM C567 Determining Density of Structural Lightweight Concrete (Cylinders)
  • ASTM C685 Standard Specification for Concrete made by Volumetric Batching and Mixing
  • Cement Quality Sampling
  • Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete ASTM C472
  • Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496
  • Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression ASTM C469
  • Density of Hydraulic Cement ASTM C188
  • Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832
  • GFRC Pull Test PCI
  • GFRC Flexural Test PCI
  • Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796

Masonry

    • ASTM C1019 Compressive Testing of Grout (Masonry)
    • ASTM C109 Compressive Strength of Hydraulic Cement Mortars Using 2" Cube Specimens
    • ASTM C1314 Compressive Strength of Masonry Prisms
    • CBC 2105A.4 Testing Concrete Masonry Units and Related Units (Core Compression)
    • ASTM C780 A7.6 Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2" Sample)
    • ASTM C140 Testing Concrete Masonry Units (CMU) and Related Units (Full Unit)
    • ASTM C426 Linear Drying Shrinkage of Concrete Masonry Units (Per Unit)
    • Masonry Core Shear Testing
    • ASTM C140 Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight)
  • ASTM C67 Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate, efflorescence)
  • Mortar or Grout, Stored and Cured, Not Tested (including molds)

Aggregates (Soils & Concrete)

  • ASTM C136 Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only)
  • ASTM C136 Sieve Analysis of Fine and Coarse Aggregates (Fine Only)
  • ASTM C117 Sieve Analysis of Fine and Coarse Aggregates (Wash Included)
  • ASTM C117 Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only)
  • Evaluating Cleanness of Coarse Aggregate
  • ASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • Unit Weight of Aggregate
  • ASTM C142 Clay Lumps and Friable Particles in Aggregates
  • ASTM D4791 Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate
  • ASTM C40 Organic Impurities in Fine Aggregates for Concrete
  • ASTM C127 Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate
  • ASTM C128 Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate
  • ASTM D5821 Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • ASTM C1252/AASHTO T304A Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM D2419 Sand Equivalent Value of Soils and Fine Aggregate
  • ASTM D3744 Flakiness Index of Coarse Aggregate
  • Durability Index (Fine)
  • ASTM D3744 Durability Index (Coarse)
  • ASTM D3744 Durability Index (Fine and Coarse)
  • ASTM C123/AASHTO T113 Lightweight Particles in Aggregate
  • CRD-C169 Resistance of Rock to Wetting and Drying

Asphalt

    • ASTM D2172 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent)
    • ASTM 6816 Determining Low Temperature Performance Grade (PG) of Asphalt Binders
    • ASTM D3549 Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores)
    • ASTM D6926/ AZ AZ 416 Method of Prep of Bituminous Mixture Test Specimens
    • ASTM D1188 and D2726/AZ 415 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD)
    • ASTM D6931 Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR)
    • ASTM D5444 Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate
    • ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures
    • ASTM D2041/AZ 417 Theoretical Maximum Specific Gravity and Density (Rice)
    • Measuring the Permeability of Bituminous Pavements and Seal Coats
    • Swell of Bituminous Mixtures
    • ASTM D1461 Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt
  • Stabilometer Value
  • ASTM D6307/AZ 427 Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method
  • ASTM D6307 Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method
  • Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven
  • ASTM D1075 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

Mechanical Testing

  • ASTM A370 Mechanical Testing of Steel Products (General Tensile)
  • AWS B4.0 Fillet Weld Break Test for Qualification (Welding)
  • ASTM E8, B557 and AWS B4.0 Tension Testing of Metallic Materials, Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products, (Welding Coupon Tensile)
  • ASTM A370 Mechanical Testing of Steel Products (Couplers)
  • ASTM E2248 and ASTM E23 Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic Materials
  • ASTM A751 Testing, Practices, and Terminology for Chemical Analysis of Steel Products
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11
  • ASTM A370 and E290 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+
  • ASTM A370, A82 and A185 Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
  • ASTM E190 and AWS B4.0 Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds
  • ASTM F307, F1554 and F606 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor Bolts Only (Tension and Yield)
  • ASTM E18 Rockwell Hardness of Metallic Materials
  • ASTM A194 or A563 Proof Test for Carbon and Alloy Steel (Nuts Only)
  • ASTM E94, E1030 and E1032 Radiographic Examination of Metallic Castings/Weldments
  • ASTM E340, E381 and AWS Macroetching Metals and Alloys
  • ASTM F606 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (HSB Assemblies)
  • ASTM A370 Mechanical Testing of Steel Products (Terminators Tensile)
  • ASTM D4884 Strength for Sewn or Bonded Seams of Geotextiles
  • ASTM D2261 Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure 
  • ASTM D5034 Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • ASTM D3039 Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  • ASTM A416 and A1061 Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

Contact Us

2 + 2 =